Maintenance Technician ($37.55)(3rd Shift)
Quick Apply Full-time 3 hours ago Full Job Description PRIMARY ACCOUNTABILITIES:
Perform preventative maintenance on more advanced/sophisticated production equipment Perform repairs on more advanced production equipment as needed Perform breakdown analysis Oversee or perform general housekeepingUpgrade production lines with new/upgraded equipment/technology Direct activities of outside contractors working on assigned line Change line for package changeovers Enforce GMP, safety, and audit standards Work independently under limited supervision (self-management) Documentation of work schedule and work tasks completed BASIC
Qualifications:
18 years or older Pass technical assessment addressing job-critical maintenance knowledge areas Experience with basic electrical systems (e.
g.
, starters, fuses, contacts, relays) Experience with electrical systems (installation, frequency drive, troubleshooting) Experience with product manuals (e.
g.
, reading and applying knowledge to make repairs).
Experience with schematics (e.
g.
, electrical blueprints with switches, starters, maps, relays).
Experience with troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns).
Experience with troubleshooting (e.
g.
, diagnostics, problem solving, etc.
).
Experience with reading mechanical drawings (e.
g.
, hydraulics, pneumatics).
Must be able to sufficiently read, write and speak English due to the safety sensitivity of this role.
HELPFUL
Experience:
Experience with mechanical systems (e.
g.
, gear boxes, chains, sprockets, motors, seals, bearings).
Experience with compressors/ammonia systems (e.
g.
, refrigeration systems).
Experience with conveyers and airveyors (air cylinders, diverters, sensors, motor/speed controls).
Experience with electronics (e.
g.
, level probes, flow meters, drives/VFDs, etc.
).
Experience with gearing and gear boxes (rebuilds, ordering parts, machining parts).
Experience with hydraulic systems (high pressure cylinders, pumps, valves, troubleshooting).
Experience with kinematics (e.
g.
, line speed/sprocket size ratios, etc.
).
Review rating instructions.
Experience with packaging/high speed production (e.
g.
, bottling, consumer products, etc.
).
Experience with PLC (e.
g.
, industrial maintenance, computer control systems, etc.
).
Experience with pneumatics (solenoids, cylinders, motor brakes, reading, troubleshooting).
Experience with pneumatics/air compression (e.
g.
, valves, cylinders, etc.
).
Experience with preventative maintenance (computerized preventative charts/data).
Experience with pumps (e.
g.
, troubleshooting, replacing seals/motors, understanding specs).
Experience with SERVO (e.
g.
, intelligent/robotic motors, in-coders, etc.
).
Experience working in team based environments (working together with others).
If interested please text 562.
486.
7337 with your name, the city you live in, and mention this ad.
Job Type:
Full-time Pay:
$37.
55 per hour Experience level:
1 year Schedule:
Day shift Evening shift Monday to Friday Night shift
Experience:
Maintenance Tech:
1 year (Preferred) PLC Troubleshooting:
1 year (Required) AC/DC and up to 480v:
1 year (Required) Work Location:
One location Quick Apply.
Estimated Salary: $20 to $28 per hour based on qualifications.
Perform preventative maintenance on more advanced/sophisticated production equipment Perform repairs on more advanced production equipment as needed Perform breakdown analysis Oversee or perform general housekeepingUpgrade production lines with new/upgraded equipment/technology Direct activities of outside contractors working on assigned line Change line for package changeovers Enforce GMP, safety, and audit standards Work independently under limited supervision (self-management) Documentation of work schedule and work tasks completed BASIC
Qualifications:
18 years or older Pass technical assessment addressing job-critical maintenance knowledge areas Experience with basic electrical systems (e.
g.
, starters, fuses, contacts, relays) Experience with electrical systems (installation, frequency drive, troubleshooting) Experience with product manuals (e.
g.
, reading and applying knowledge to make repairs).
Experience with schematics (e.
g.
, electrical blueprints with switches, starters, maps, relays).
Experience with troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns).
Experience with troubleshooting (e.
g.
, diagnostics, problem solving, etc.
).
Experience with reading mechanical drawings (e.
g.
, hydraulics, pneumatics).
Must be able to sufficiently read, write and speak English due to the safety sensitivity of this role.
HELPFUL
Experience:
Experience with mechanical systems (e.
g.
, gear boxes, chains, sprockets, motors, seals, bearings).
Experience with compressors/ammonia systems (e.
g.
, refrigeration systems).
Experience with conveyers and airveyors (air cylinders, diverters, sensors, motor/speed controls).
Experience with electronics (e.
g.
, level probes, flow meters, drives/VFDs, etc.
).
Experience with gearing and gear boxes (rebuilds, ordering parts, machining parts).
Experience with hydraulic systems (high pressure cylinders, pumps, valves, troubleshooting).
Experience with kinematics (e.
g.
, line speed/sprocket size ratios, etc.
).
Review rating instructions.
Experience with packaging/high speed production (e.
g.
, bottling, consumer products, etc.
).
Experience with PLC (e.
g.
, industrial maintenance, computer control systems, etc.
).
Experience with pneumatics (solenoids, cylinders, motor brakes, reading, troubleshooting).
Experience with pneumatics/air compression (e.
g.
, valves, cylinders, etc.
).
Experience with preventative maintenance (computerized preventative charts/data).
Experience with pumps (e.
g.
, troubleshooting, replacing seals/motors, understanding specs).
Experience with SERVO (e.
g.
, intelligent/robotic motors, in-coders, etc.
).
Experience working in team based environments (working together with others).
If interested please text 562.
486.
7337 with your name, the city you live in, and mention this ad.
Job Type:
Full-time Pay:
$37.
55 per hour Experience level:
1 year Schedule:
Day shift Evening shift Monday to Friday Night shift
Experience:
Maintenance Tech:
1 year (Preferred) PLC Troubleshooting:
1 year (Required) AC/DC and up to 480v:
1 year (Required) Work Location:
One location Quick Apply.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
